page
$0.00 (0 items)
You currently have 0 items in your cart
Subtotal (ex GST)
Charges
Discounts
-
Freight
No Charge
Requires Quote
Plus GST
Total (inc GST)
Discounts (ex GST)
-
Giftcard Total
Net Owing
Checkout

Loctite 406 Instant Adhesive 100ml

Product Code: MER-AI406-100

BUY ONLINE FROM A DISTRIBUTOR --- CLICK HERE
RRP $133.85
$133.85 ex GST
Increase value Decrease value
Quantity In Cart:  
Qty Each
Description
LOCTITE 406 is a low viscosity, fast curing instant adhesive that is ideal for bonding plastics and elastomeric materials where very fast fixturing is required.

LOCTITE® 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.

  • Rapid bonding of plastic & rubber, including EPDM
  • LOCTITE 770 or LOCTITE 7239 primer improves adhesion of difficult-to-bond substrates
Features
  • Bond areas should be clean and free from grease. Clean all surfaces with a Loctite® cleaning solvent and allow to dry.
  • To improve bonding on low energy plastic surfaces, Loctite® Primer may be applied to the bond area. Avoid applying excess Primer. Allow the Primer to dry.
  • LOCTITE® Activator may be used if necessary. Apply it to one bond surface (do not apply activator to the primed surface where Primer is also used). Allow the Activator to dry.
  • Apply adhesive to one of the bond surfaces (do not apply the adhesive to the activated surface). Do not use items like tissue or a brush to spread the adhesive. Assemble the parts within a few seconds. The parts should be
  • accurately located, as the short fixture time leaves little opportunity for adjustment.
  • LOCTITE® Activator can be used to cure fillets of product outside the bond area. Spray or drop the activator on the excess product.
  • Bonds should be held fixed or clamped until adhesive has fixtured.
  • Product should be allowed to develop full strength before subjecting to any service loads (typically 24 to 72 hours after assembly, depending on bond gap, materials and ambient conditions).
Technical Specifications
Keywords Adhesive
Brand LOCTITE
Size 100 Mil